Motor Clean
Highly effective additive combination for the effective removal of soiling on the inside of the engine before the oil change. Dissolves oil residues and deposits, envelops dirt particles and transports them out of the oil circuit when the waste oil is drained. The fresh oil can then deliver its full performance in the cleaned engine. This ensures rapid oil penetration, optimal engine performance, minimized wear and reduced exhaust emissions. Suitable for all commercially available motor oils in gasoline and diesel engines with and without a particulate filter (DPF/GPF). Can be safely used in vehicles with toothed belt running in oil. Not suitable for motorcycles with a wet clutch. 500 ml is sufficient for up to 5 l of oil. Tested for use with catalytic converters and turbochargers.
- highly economical
- tested for particulate filters and catalytic converters
- prevents lubrication deficiency
- reduces pollutant emissions
- gentle cleaning
- does not attack common sealing materials
- rapid and effective cleaning
- simple to use
- tested for turbocharger
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- EUH066 Repeated exposure may cause skin dryness or cracking.
- Danger H304 May be fatal if swallowed and enters airways.
Highly effective additive combination for the effective removal of soiling on the inside of the engine before the oil change. Dissolves oil residues and deposits, envelops dirt particles and transports them out of the oil circuit when the waste oil is drained. The fresh oil can then deliver its full performance in the cleaned engine. This ensures rapid oil penetration, optimal engine performance, minimized wear and reduced exhaust emissions. Suitable for all commercially available motor oils in gasoline and diesel engines with and without a particulate filter (DPF/GPF). Can be safely used in vehicles with toothed belt running in oil. Not suitable for motorcycles with a wet clutch. 500 ml is sufficient for up to 5 l of oil. Tested for use with catalytic converters and turbochargers.
500 ml is sufficient for up to 5 l of oil. Add to motor oil at operating temperature before an oil change. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Compatible with all commercially available motor oils. Other information Not suitable for motorbikes with a wet clutch!
